The objective of the present study is to evaluate the hot tearing tendency based on the Clyne and Davies model by evaluating the critical times which can be obtained using a newly developed method. A method to determine the critical times required to calculate the crack susceptibility was presented based on the measurement results with Al–Si alloys, and the method to calculate the crack susceptibility coefficient was presented. In the newly developed method named “Signal intensity method,” signals were generated by tapping the edge of a waveguide which is immersed in molten and solidifying sample and the critical solid fractions were obtained from the signal intensity change. The conventional thermal analysis was also performed simultaneously and the corresponding critical points were identified. The method shown in the present study will enable the determination of the crack susceptibility coefficient with higher accuracy.